EPS@ISEP | The European Project Semester (EPS) at ISEP


This is an old revision of the document!


Project Title

Smart Companion Pillow

Sponsors

Supporters

Project Summary

The goal is to design, build and test a pet-like pillow to provide company, monitor, interact and stimulate individuals, following sustainable and ethical practices. The purpose, target user segment and the full set of device requirements are to be defined by the team based on the state of the art, marketing, sustainability and ethical analysis.

The project requirements are:

  1. Use or reuse low cost hardware solutions;
  2. Comply with the following EU Directives:
    1. Machine Directive (2006/42/EC 2006-05-17);
    2. Electromagnetic Compatibility Directive (2004/108/EC 2004 12 15);
    3. Low Voltage Directive (2014/35/EU 2016-04-20);
    4. Radio Equipment Directive (2014/53/EU 2014-04-16);
    5. Restriction of Hazardous Substances (ROHS) in Electrical and Electronic Equipment Directive (2002/95/EC 2003-01-27);
  3. Mandatory adoption and use of the International System of Units (The NIST International Guide for the use of the International System of Units)
  4. Use open source software and technologies.

Maximum budget to build a prototype: 100.00 €

Participants

Institution: Instituto Superior de Engenharia do Porto (ISEP)

Team N.: 4

Students:

  • Alexandre Reis;
  • Elien Gielen;
  • Ko Wopereis;
  • Marcel Pasternak;
  • Tobias Schneider;
  • Vaido Sooäär.

Panel of Supervisors:

  • Abel Duarte (ajd 'at' isep 'dot' ipp 'dot' pt);
  • Jorge Justo (jfj 'at' isep 'dot' ipp 'dot' pt);
  • Maria Benedita Malheiro (mbm 'at' isep 'dot' ipp 'dot' pt);
  • Maria Cristina Ribeiro (mcr 'at' isep 'dot' ipp 'dot' pt);
  • Manuel Silva (mss 'at' isep 'dot' ipp 'dot' pt);
  • Paulo Ferreira (pdf 'at' isep 'dot' ipp 'dot' pt);
  • Pedro Barbosa Guedes (pbg 'at' isep 'dot' ipp 'dot' pt).

Contents

Contacts

  • Alexandre Reis (alexandre 'dot' soares 'dot' reis 'at' gmail 'dot' com)
  • Elien Gielen (eliengielen98 'at' gmail 'dot' com)
  • Ko Wopereis (kowopereis 'at' gmail 'dot' com)
  • Marcel Pasternak (pasternak 'dot' marcel1 'at' gmail 'dot' com)
  • Tobias Schneider (tobias 'dot' schneider96 'at' gmail 'dot' com)
  • Vaido Sooäär (svaido17 'at' gmail 'dot' com)

Utilities

Acknowledgements

  • Sponsors: A Central da Borracha (pillow foam); Departamento de Engenharia Electrotécnica (DEE), ISEP (electronic components); Departamento de Física (DFI), ISEP (electronic components); Flexitex (pillow cover), Laboratório de Sistemas Autónomos (LSA), ISEP (raw material and the use of a 3D printer); SOLIUS (electronic components).
  • Eng.º Vítor Costa Cerqueira, DEE, ISEP (wiki installation and management)
  • Prof. João Correia Lopes, Departamento de Engenharia Informática (DEI), Faculdade de Engenharia da Universidade do Porto (FEUP) (wiki template)

EPS@ISEP Wiki Template 2012-01-15 15:35

QR Code
QR Code start (generated for current page)